Unfortunately, it is not possible to directly link a scene to the Smart Remote. However, you can achieve the same result using the method below.

Steps to activate a scene via the Smart Remote

1. Pair the Smart Remote with a single lamp
   The Smart Remote can switch one lamp on and off.

2. Use this action as a condition in a scene
   Create a scene in the app where the lamp is switched on.
   Set this lamp as the trigger. Once the lamp is switched on with the Smart Remote, the scene will automatically be activated.

Example use

Objective: Create ambience lighting or adjust the lighting for an activity.

Scenario: Movie night

• The Calex A60 Gold is dimmed to 30%

• The Calex G125 is dimmed to 20%

• The Calex Smart Halo is set to blue

By using the Smart Remote, you can quickly and easily activate scenes without needing multiple switches or remotes. This makes it simple to adjust the lighting in a room to suit your preference or the activity.

Of course, you can also use other conditions to trigger a scene, such as when a lamp is dimmed below or above a certain level. For example, with this condition:

Instead of a lamp, of course, you can use a smart power plug to trigger a scene.