To update the firmware for Outdoor Mesh products we recommend you to read this article carefully before you start.

The update should be done via Bluetooth and the Smartphone should be at a short distance (1 to 2 meters) from the lamp. The update takes about 3.5 minutes per lamp. Keep the update screen on your phone active while updating the firmware.

If you want to check what the current firmware of the lamp is you can do it like this from the app:

Start in the 'My Home' tab
Tap the device in question to open its control screen
Tap the 3 dots (...) or the pencil symbol in the top right corner.
At the bottom tap 'Search for firmware update'.
The screen that opens shows the current firmware version (Vx.x)
Tap the arrow (<) in the upper left corner 3 times in a row to return to the 'My Home' tab

If a new Firmware update is available you will receive a dialog notification in your app on your smartphone indicating this for the respective Bluetooth Mesh lamp.

This notification usually comes with added information about the resolved issues or improvements the update brings.

In this screen, choose the option 'Update', then a new dialog message may be displayed alerting you that the update may take some time. Then in this dialog message, choose the option 'Start Update'.

A progress bar will be displayed during the update. Leave this screen active and do not close it until the update is successfully completed.

Once the update is successfully completed, the app will return to the control screen of your Bluetooth Mesh lamp.

After the update is performed it may take some time for your lamp to fully recover within the Bluetooth Mesh network.