The Smart Remote Control and Smart Wall Switch can be paired with Smart lamps and Smart power plugs.
Ensure that the lamps or plugs are switched on and receiving a stable Wi-Fi signal. This is the only way the devices can be connected to the Remote Control or Wall Switch.
Note: The Remote Control or Wall Switch itself is not visible in the app.
Pairing
Make sure the Smart device is already connected to the app.
Turn the power of the Smart device off and on (interrupt the power supply).
Within 30 seconds, press the reset button on the Smart Remote Control or Smart Wall Switch and hold it for 5 seconds until the indicator starts blinking.
Wait until the Smart device starts blinking or switches off and on.
Repeat steps 1–4 to pair additional Smart devices.
Unpairing
Press and hold the ON button of the Smart Remote Control or Smart Wall Switch for 5 seconds until the indicator blinks.
The Smart Remote Control or Smart Wall Switch is now unpaired.
Important Notes
If the Remote Control or Wall Switch is paired with multiple lamps or Smart plugs, all connected devices will be unpaired.
If you only want to unpair a single lamp or Smart plug, ensure that all other lamps or plugs are completely switched off by interrupting their power supply.